Home Improvement

Home Improvement - Articles & Information To Help You With Home Improvement

How To Replace The Rollers On Your Patio Sliding Glass Glass Door


Home Improvement

Hiring a professional to replace your rollers could cost you around $100 not including the cost of the replacement parts. Below are detailed steps containing all the information you will need to know to replace your patio sliding glass door rollers yourself.

* Before you start, understand that you need to take the sliding glass door out of its frame to work on the rollers. The sliding glass door is heavy. You may need the assistance of another to help you remove the door.

1) Your patio glass door will have two separate glass units. One unit is the door that you slide and the other unit is stationary. First, stand outside your house and look at your sliding glass door. If the stationary unit is between you and the sliding unit you will most likely have to remove the stationary unit so that you can get to the glass sliding unit.

Before you go through the trouble of removing the stationary unit, first try to go inside your house and see if you can remove the sliding unit. Usually you cannot because there is a lip along the bottom of the patio glass door frame (it keeps moisture out of the house) that prevents the sliding glass door from being removed from the inside.

If the rollers on the bottom of the door are difficult to get over the lip, you can adjust them to help you create more room (go down to step 2). If it is not the rollers but the sliding unit's frame preventing you from pulling the sliding unit out of the door frame, you are going to need to remove the stationary unit first before you can remove the sliding unit.

To remove the stationary unit, you first need to take out your screen door (if you have one). Lift one end of the screen door frame and use a screwdriver to lift the roller on the bottom of the screen door frame off of the track. Do this to both ends of the screen door and your screen door will pull out of the door frame.

The stationary unit is held in place by a metal piece that runs along the bottom of the track from the corner of the stationary unit to the bottom of the side jamb (there is a chance this piece is missing but if you do have one remove it from the track). After you have removed the metal piece, look for screws holding the stationary unit frame in place. After removing all of the screws try pulling the stationary unit out of the door frame. If you are having trouble pulling out the stationary unit, try placing a screwdriver between the stationary unit's bottom frame and the track it is resting on. Lift up on the screwdriver while you have a helper pull out the stationary unit from the door frame. Be careful not to use too much force with the screwdriver so that you do not damage the door track.

2) You may need to create more room when you attempt to remove the sliding unit from the door frame. To create more room you can adjust the rollers on the bottom of the sliding unit. By turning the adjusting screws on the rollers clockwise the wheels move up into the sliding unit's frame giving you more room. The adjusting screws are located either at the bottom of the sliding unit's frame or in the sides of the frame. There is a chance that there are plugs covering the screws.

After you adjust both rollers (one on each side of the sliding unit's frame) try to remove the sliding unit from the door frame. If the unit is still getting stuck you may need to get someone to help you. Have your helper lift one side of the unit and pull outwards while you try to pry the other side of the unit over the track.

3) To remove the rollers from most sliding unit's you need to remove the bottom of the sliding unit's frame. Most likely the screw that holds the roller in place is the same screw that holds the frame together. Remove the screw from both sides of the unit. Then try to remove the bottom piece of the frame off of the sliding unit; you may need to use a rubber mallet or a piece of wood and tap on the bottom of the frame until it comes off of the sliding unit.

Now that you have removed the bottom of the frame you can take a close look at your patio glass door rollers. Remove one of the rollers and match it up with one of the rollers on this page http://www.swisco.com/page/SI/CTGY/patio-glass-rollers-wheels-axles or bring the roller to your local hardware store.

It is a good idea to replace both sliding door rollers at the same time to prevent extra wear-and-tear to one new roller, which will have to work twice as hard when paired with an old roller.

4) After your new rollers come in, replace your old rollers with the new ones. To make it easier to install the sliding unit back into the door frame, adjust the rollers to be all the way up into the frame. Once you have the sliding unit back in the door frame you can adjust the rollers for optimal performance. Keep adjusting the rollers until the door is sliding back and forth easily.


I am part of the third generation of the family business. Our business Swisco supplies and manufactures replacement window and door parts. To be helpful to our customers we have to be very knowledgeable about the parts we sell and how they are installed. Visit our Web site at http://www.Swisco.com







Car Insurance Rates   |   Home Loans   |   Find Contractors   |   House Plans   |   Global Home Finders



| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 |











Planning Permission Tips Uk - What To Show And What Not To Show On Your Application Drawings
Many successful business deals are the result of being a bit canny with the information that you already know - keeping a tight lip when needed and only letting the other side know just the bare minimum requirement of information and never laying all your cards onto the table. Successful negotiators use this tactic all the time. I expect all of us can remember a time when we have left a meeting wishing that 'I hadn't of said that!' Well presenting a Planning Application can often involve the precise same tactics at times where you need to retain the advantage in your presentation or application scheme.Many detailed or complex residential development projects often involve works that can often be implemented without formal Planning Permission - Many garage conversio...(related: Home Improvement)


How To Replace The Rollers On Your Patio Door
Have you noticed your patio door is getting harder and harder to open? Maybe it's time to change the rollers on the door. They generally ...(related: Home Improvement)


Removing Old Aluminum Windows
This week we are going to talk about the process of actually removing your aluminum windows in preparation for installing vinyl replacement windows. Let's start with a horizontal sliding window, which is pretty common nationwide. There is going to be a sliding panel and a stationary panel. You want to remove the slider first. All you do is slide the panel open, grab the sides of the panel with your hands,lift up and swing out. Under ideal circumstances, it would be that easy. However, there are small obstacles that can prevent you from lifting out the panel.Many sliding windows have rollers on the top as well as the bottom. The top rollers don't actually do anyt...(related: Home Improvement)


Installing Retrofit And Replacement Vinyl Windows
In previous articles i explained to you how to determine whether your windows are candidates for vinyl replacement style frames or retrofit style frames. This week I'm going to explain the installation techniques for both frame styles. Let's start with the retrofit frame.Retrofit window installation is really the easiest of all. The retrofit window already comes with an exterior trim attached. That's the flush fin that goes against the outside surface, usually stucco. Prepare the window by drilling 3/8" holes in the areas of the frame where you want to screw it in place. Normally, there will be 3 holes on each side and 3 more across the top. Don't predrill any holes in the bottom track. After removing the old panels, you want to run a heavy bead of caulk on the face of the old aluminum frame that you left in place. Then you and a h...(related: Home Improvement)


Checking For Asbestos In Your Home
If you are concerned about asbestos exposure you are not alone. Many individuals wonder if they have been exposed, a...(related: Home Improvement)


A Carefully Planned Outdoor Kitchen Is Worth The Investment
Do you have any idea how popular outdoor kitchens are becoming? We spend more time at home than ever before and we are fixing up those homes instead of buying new. Homeowners are opting for an outdoor k...(related: Home Improvement)


What To Look For In A Drill Press
A drill press, also known as a pillar drill, is the stationary form of a hand-held drill. The advantage of the drill-press over the hand drill is the tool's accuracy and power. A drill press is a very valuable tool with several different types and models of drill presses to choose from. Here are a few things to consider when purchasing your own drill press.Floor vs. Bench-Top ModelA floor model is set directly on the floor while the bench-top mo...(related: Home Improvement)


Carbon Monoxide Can Be Deadly--early Detection Monitors Make It Easy To Protect Your Family
If you burn gas, kerosene, or wood in your home to produce heat for cooking or warmth, you need to monitor the level of carbon monoxide. Carbon monoxide is odorless and can easily build up to dangerous levels. Ordinary carbon monoxide detectors don't sound an alarm until certain levels of carbon monoxide accumulate in the air. New monitors show the amount of carbon dioxide in the air at any given time, so...(related: Home Improvement)




Google




Things To Consider When Buying A Hot Tub Or Jacuzzi Tub
We recently purchased a new Hot Tub and Gazebo from Cal Spas in Minnesota. The purchase was not something we planned, just something that caught our eye when visiting the Minnesota State Fair. As a result we learned a few things that would have made our purchase smarter. In the end we're pleased with the decision but its easy to say now that all the work is done. In this article I'll outline the information I wish I had considered when making this purchase. I hope it helps you in your decision.The TubThis isn't going to be a detailed rundown on what to look for in a good tub or who to buy it from. I'll leave that to the other articles out on the internet. There are two points I'll make of things I may have changed. We purch...(related: Home Improvement)

Which Type Of Radiant Floor Heating Is Best For Me?

If you are looking to warm your floors with a radiant heat system, and have typed "radiant heat system" into a search engine, you might find yourself scratching your head at this point.  There are dozens of products available to purchase, and there are even more companies telling you that their product is the best.

So which product is the best?  Should you install a hydronic heating system that pumps hot water through your floors, an electric cable heating system, or a low voltage screen system?  The answer lies in the type of project you are doing.  Not every system is ideal for every project, but there is an ideal system for every project.

Hydronic Heating Systems

Hydronic floor heating is the oldest and most popular type of radiant floor heatin...(related: Home Improvement)

Planning Permission Tips Uk: The Value Of Design Statements When Submitting A Planning Application
...(related: Home Improvement)

site-map - Copyright © 2006 | Contact Webmaster | All Rights Reserved. | Home Improvement