Building Wood Stairs
|
Building a set of wood stairs is not nearly as hard as you may think. With some basic wood tools and a bit of algebra you can easily build your own. Of course this can get a bit tricky for stairs with several landings but the method is still the same.
This article will cover the steps for building a straight set of stairs. Chances are if you are reading this then you are still learning and won't be taking on a complex stair anyway.
Now, we will assume that it is from a deck to a concrete pad. The deck is going to be 48" wide and at eye level from the ground.
Tools you will need:
You will also need:
Find the overall rise
We want to know the exact vertical distance from the top of the concrete pad to the top of the deck. Take one of the 8' 2x4's and rest one end on the deck and hold the other over the pad, Place the level on the 2x4 and level the board. Then simply measure from the bottom of the 2x4 to the pad. Lets say it is 64". This is the overall rise.
Now determine the overall run
Before we can do this we have to determine how many steps we need.
So first..
Take the overall rise, 64", and divide it by 7.25", which is the typical height of 1 riser (step). This gives us 8.83, which rounds up to 9, So we will go with 9 risers.
Important: There is always 1 less tread then risers. Whether you go up or down the last step is onto the deck or the pad. So 1 less tread.
Now we take 10.5", the width of a typical step, and multiply it by 8. This gives us 84". This is the overall run.
While we are doing the math we need to figure out the exact rise of each step. We simply take the overall rise of 64" and divide it by 9 and we get 7.111" or 7-1/8", or close enough to it. So each riser will be 7-1/8".
Time for some layout
First thing. Grab your framing square. The long leg is the tread (step) leg and the short leg is the riser leg. Also, use the numbers on the outside of the square only.
Take some masking tape and wrap a piece around the framing square to establish you rise and run. Mark 10.5" on the outside of the long leg and 7-1/8" on the outside of the short leg.
Layout one of the 2x12's on your saw horses or work bench. WIth the long leg of your framing square towards the end of the board start to line up the tape marks to the edge of the board facing you. Once you have the square in position mark the outside edge of it with your pencil.
Continue to do this until you have the required number of steps, 8 in this case. This first riser is always shorter by the thickness of the steps, for us that is 1.5". This makes the first riser 5-5/8".
Cut 'em out
Now use you circular saw to cut out the stringers (technical name for 2x12 with stair marks on it) being sure to cut on the waste side of the line. When you cut into the corner with a circular saw the blade misses some of the wood on the bottom side of the board. This is fine, simply cut up to the line and stop, then finish the cut with your hand saw.
Now use the first stringer as a template for the other two. Lay the stringer onto the 2x12's and trace around it. Then cut out the other stringers the same as the first.
Reinforce the stringers
Align one of the 8' 2x4's along the bottom edge of the string and mark it to fit the profile of the ends of the stringers. Cut the 2x4 and secure it to the bottom edge of the stringer. Repeat this for one other stringer. These help to strengthen the stringers and reduce "bounce" in the stairs. Use the framing nails to secure them.
Assemble the stairs
The plywood is used to attach the stairs to the deck. Secure the sheet of plywood to the top end of the stringers. The two outside stringers are nailed flush with the edge of the plywood while the third stringer is centered on the sheet. Simply nail through the plywood into the face of the stringers using framing nails. 4 into each stringer will be enough.
Now take the 45" 2x6 and nail it in between the bottom of the outside stringers. The 2x6 will fit into the notch cut into the center stringer. This provides the right spacing for the bottom of the stairs and secures them to the pad.
Attach them to the deck
Move the stairs into their final position. make sure they are level across the stringers and that the risers are plumb. When the stairs are positioned correctly nail through the plywood into the side of the deck. Use some 3" concrete nails to secure the 2x6 spacer to the concrete pad.
Install the treads
Cut the 8 - 8' 2x6's in half, be sure to cut them square. Starting at the bottom of the stairs, start placing the 2x6 stair treads. Simply center them on the stringers and use some 3"deck nails to attach them. You can also use an exterior adhesive to assure that they don't move.
Continue to work your way up the stairs until you reach the top.
You are done... well, almost
Railings. You need to install a railing to keep people from falling off.
About The Author
Dave Markel is the author of "The All Wood Working Journal". He has helped hundreds of individuals improve their wood working skills. Visit his site at http://all-wood-working-plans.com.
|
|
|
Installing Vinyl Replacement Windows On The Second Floor
If you have a two story house, and you are going to replace the windows on both the first and second floor, there are little tricks that you can use to make the upper floor job a bit safer and easier. If the windows are replacement style frames, you install them from inside the house, so the only thing that you will do different than the first floor windows is to use an extension ladder to caulk the exterior. So, let's talk about doing retrofit ...(related: Home Improvement)
Brighten Up Your Shelves With Picture Frames
Would you like to add a personal touch to your home or office, but not sure how? Picture frames may be your answer. Picture frames are a fun and simple way to add color, character and style.Decorating with picture frames is fun and simple. To add a splash of color to a shelf or mantle choose a series of similar frames in coordinating colors, such as three shades of green. To set a theme in the bedroom stick with one basic color and two or three styles of frames, such as silver or pewter antique-style frames. Or to make a dramatic statement on a wall choose one bold color, such as black or deep red, and identical picture frames, such as simple squares. No matter what l...(related: Home Improvement)
All You Need To Know About The Feng Shui Bagua Map
The feng shui bagua map is an octagonal shaped map which allows you to evaluate in feng shui terms any living or working space. The feng shui bagua is a very important feng shui tool and indispensable when we wish to harmonize a place and the elements in it.According to...(related: Home Improvement)
Refining Your Area Rug Choice
As a Managing Partner of www.exquisiterugs.com, the question I am often asked, "What determines the quality of a rug?" While the question posed seems relatively simple it is broad in scope and indeed more complex. There are a number of factors that need to be addressed to answer this question accurately.The rug industry is inundated with an extensive variety of area rugs. Unlike the past, today, there are rugs targeted toward specific market segments. Therefore, before furnishing a definite reply, I inquire, "Are you shopping for an inexpensive rug or a high end hand knotted piece".If budget is the primary criteria, there are abundant choices. For the price conscious consume...(related: Home Improvement)
Planning Permission Tips Uk - Garage Conversions - What Value Do They Add?
Most conversion works to an existing structure is often more expensive than having it knocked down & rebuilt....(related: Home Improvement)
Remodeling Your Kitchen
Remodeling a kitchen is one of the best investments a homeowner can make. For most homeowners it is the most important room in the house. It is used for cooking, eating, and gathering, and is typically a focal point in the home. Consequently, though a great investment, a kitchen-remodeling project can be very disruptive to the family. And the length of the disruption can take as long as two or three weeks.The Planning Stage<...(related: Home Improvement)
How To Give Your Home More Space
Have you been wondering how to free up space in your home? Do you live in a dorm or an efficiency where every inch of space counts?Maybe you're tired of trying to come up with ideas on how to reduce the clutter? Or don't know where to start?If you don't know where to start and feel like you're backed into a corner then maybe this is your solution to the problem.Let me introduce you to the top-to-bottom-strategy.It is ...(related: Home Improvement)
Got Attic Mold? Lets Talk Energy Conservation!
It happens to countless homeowners around the end of the year - you make the annual visit to your attic to collect the h...(related: Home Improvement)
Waterproofing Basement Walls
Although representatives from waterproofing companies may guarantee results from their product or service, it is wise to keep in mind that there is no magic solution to waterproofing basement walls. In order to save costs on unneeded repairs, it is the responsibility of the homeowner to find the cause of the leak. Knowing where the leak is coming from could save you thousands of dollars. Do some inspecting around your basement. Does the leak appear to come from plumbing condensation? Are there cracks in the walls or windows? You should be able to answer these questions before calling a professional to assist with waterproofing your basement.One reason that basement walls may leak is because of the settling of the house. Over a peri...(related: Home Improvement)
Save Time & Money Doing Your Own Basic Electric Wiring
Hiring a professional electrician can be very expensive and is often the reason why people try doing their own basic electric wiring themselves.I have seen the good, the bad and the ugly results of these efforts and I have come to the conclusion that basic electrical wiring is not something anyone should do without proper guidance, tools and confidence.It is so important that before attempting any of these basic electrical wiring projects that people are aware of how dangerous electricity is and how important safety is for you and for your family and family home.90 percent of the time I recommend hiring a licensed electrician over doing your basic electrical wiring yourself. Not doing this will usually end up costing even more money than before and increase the risk of bringing your family into danger without even knowing...(related: Home Improvement)
site-map - Copyright © 2006 | Contact Webmaster | All Rights Reserved. | Home Improvement